Industrial Man Lifts for Every Use

Industrial Man Lifts for Every Use

Industrial Man Lifts have been used to help people reach work spaces in high places for many years. Many companies find it more cost effective to own an aerial work platform designed for their specific purpose rather than take a chance on an employee getting injured by improperly using non approved equipment. Manlifts can be custom made to fit any purpose. They are commonly used for an assortment of maintenance applications, everything from changing lights, electrical work, cleaning high surfaces to aviation maintenance. Wherever you need to use an aerial work platform you can find industrial man lifts to fit your purpose. Manlifts are usually fitted with any number of safety accessories, such as:

• Alarms for descent


• Hour meters


• Horns


• Power supplied to the platform


• An oscillating front or rear axle


• Pneumatic tires


• Dual multi disc brakes


• One hand operational controls


• Folding down guardrails


• Flashing lights


• Motion sensor alarms


• Multi axis tilt sensors


• Emergency shut off switches at both the platform and lower deck controls

As well as having specific safety features, aerial work platforms can be customized based on your exact specifications. You can have them made with large or smaller platforms depending on the purpose for their intended use. They can come with electric motors for indoor use, or gas powered motors as standard use. There are many different types of aerial work platforms, from rough terrain scissor lifts, to articulated boom lifts. All of the aerial work platforms that are used need to meet specific standards such as being:

• ANSI compliant


• OSHA compliant


• CSA compliant

Industrial man lifts can come in varying heights, some as high as 60 feet or more. They are usually made with a non-skid deck made from metal. The decks can come with roll out extensions for accommodating additional persons. The scissor lifts are made with no maintenance scissor bearings for an increased life span. Each aerial work platform can come with either a 2 wheel drive or 4 wheel drive package. The limits of their capabilities are truly limited only to your imagination. Manlifts can be made to any specification for any purpose. Whatever your needs are, there are industrial man lifts made for them.

Industrial Man Lifts for Every Use

Gimbal Install Removal Device (G.I.R.D.)

Gimbal Install Removal Device (G.I.R.D.)

Gimbal Install Removal Device (G.I.R.D.) Features:

Gimbal Install Removal Device (G.I.R.D.) increase safety of the camera unit while minimizing work load intensity. Supports almost all Gimbal Camera’s, to include FLIR, L-3, and many more. Designed so that one man can safely perform an install or removal of a Gimbal camera to an aircraft.

Gimbal Install Removal Device (G.I.R.D.)

Gimbal Install Removal Device (G.I.R.D.) Specifications:

• The Gimbal Install Removal Device (G.I.R.D.) comes with x1 Lifting Jack and x1 Rotational Ride Plate and x2 Safety Straps.


• Tilt down push handle


• X/Y Tilt capable


• 360 rotating pump handle


• Aluminum construction


• Blickle Precision Casters

Industrial Manlifts is YOUR total aerial access solution provider. We can customize any aerial access solution for any project. Operators standing by, (888) 730-8377.

Gimbal Install Removal Device (G.I.R.D.)

Galvanized Industrial Stairways

Galvanized Industrial Stairways

Galvanized Industrial Stairways Features:

• All-welded construction for superior strength


• Hot-dipped galvanized finish for exceptional rust resistance


• Grip strut stairs and landing deck for slip resistance in wet conditions

Galvanized Industrial Stairways

Custom Stairway & Landing that would allow access to the upper level of their facility while meeting all applicable OSHA, ANSI, and local codes.

Our Custom Galvanized Industrial Stairways & Landings are offered in a variety of painted finishes with your choice of treads and decking constructed of:

• Bar grating


• Floor plate


• Fiber glass

Typical industrial applications: automotive, chemical, construction, food, manufactured goods, metalworking, military/government, mining, shipping, steel, textiles, energy.

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

 

Galvanized Industrial Stairways

Die Shelves for Pallet Rack Beams

 

Die Shelves for Pallet Rack Beams Description:

IML Die Shelves feature solid sheet steel decks that increase the strength and utility of your existing pallet rack locations. Designed for standard 1 5/8″ step beams, these die shelves are available in 2,000 to 6,000 lb. capacities. Options include waterfall edges, backstops with lip up. Finished in IML Gray Enamel. Custom designs and colors are available. Send us your RFQ today!

 

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Die Shelves for Pallet Rack Beams

Coil Racks

 

Coil Racks Description:

IML Coil Racks ensure easy and economical storage & handling of strip coil and wire, no matter what the size. Inclined longitudinal members safely cradle loads and prevent marking of stored materials

 

 

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Coil Racks

Post Protectors

 

Post Protectors Description:

Protect your stored materials as well as shelves and racks. IML Post Protectors are an effective and inexpensive way to avoid incidental damage to rack posts, shelving corners, partitions, overhead door track bases, as well as prevent the serious personal injuries that can result from such accidents.

Installation is easy. Simply position IML Post Protectors around rack posts, shelving corners, partitioning, or track base. Drill proper size holes in floor, and then anchor with 1/2″ fasteners (not provided).

• Available for both 3″ and 4″ diameter columns.


• Several heights to accommodate various shelf, rack, and column designs.


• Fabricated from rugged 1/4″ steel plate for durability.


• Quick, simple installation.


• Finished in IML Safety Yellow.

Ships UPS. Delivery from factory stock in approximately 5 working days.

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Post Protectors

Pallet Rack Bay Dividers

 

Pallet Rack Bay Dividers Description:

Pallet Rack Dividers from IML Products are the perfect permanent or temporary solution to keeping your pallet racks, pallets, and the products in your warehouse organized and safe from damage.

Pallet rack dividers can increase your warehouse space by allowing you the ability to vertically stock your product neatly against the dividers as opposed to stacking products on top of and against other products. That’s not efficient and it’s not safe.

Pallet rack dividers also provide your warhouse with dedicated spacing for pallets that could easily get out of hand in wide open spaces.

Each pallet rack divider is:

• Made of 1″ diameter tubing for durable performance


• Pre-punched with mounting holes


• Finished in IML Safety Yellow.


• Designed to fit 3″ rack beams.


• Available for 36-, 42-, and 48-inch deep pallet racks.


• Fasten to back beams on 54″ centers.

Explore the different sizes below and contact us if you don’t find what you were looking for

 

pallet dividers

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Pallet Rack Bay Dividers

Warehouse Dollies, Trucks and Carts

 

Warehouse Dollies, Trucks and Carts Description:

Rigid frames, all-welded construction, and sturdy steel decking make these trucks, dollies, and carts ideal for warehouses or any shipping and receiving or production operations. They are available in many different types and sizes to accommodate most applications. If you don’t see one that will suit your needs, contact us and we can custom design and custom fabricate a dolly, truck or cart to fit your unique needs. Construction Features 1,000, 2,500, and 3,200 lbs. capacities. 14 gauge deck and shelving standard. Two rigid and two swivel ball bearing casters in standard in 5″, 6″ and 8″ sizes. Gray enamel finish. Options Four swivel casters. 2″ lips up or down on shelves. Colors. Handles on one or both ends.

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Warehouse Dollies, Trucks and Carts

Portable Stacking Racks

 

Portable Stacking Racks Description:

IML Portable Stacking Racks are a versatile answer to your ever-changing storage, handling, or transporting needs, allowing materials to move through your entire production process…all on the same rack…even heavy or irregular-shaped pieces that cannot normally be stacked atop one another!

Their plug/post joint systems afford superior stacking stability over commonplace wood pallets while providing comparable weight capacities. And when not in use, portable racks can be broken down for convenient compact storage, freeing up floor space that would otherwise be cluttered with bulky, permanent rack systems.

IML engineers have extensive experience designing portable stacking racks for virtually every type of commercial or industrial application, including: textiles, wire coils, automotive parts, tires, and more.

Available in open frame, wood, steel, welded wire mesh, or perforated steel decks. Standard portable rack sizes change in 6″ increments—or can be custom manufactured to any size.

Ideal for both inter- and intra-plant materials movement. And custom engineering is available for over-the-road shipping, product protection, and other strategic transportation needs.

Construction Features

• Welded tubular and structural steel construction provides superior load-carrying strength, up to 2,000 lbs. (standard duty) or 4,000 lbs. (heavy-duty).


• Standard target is 4″ square tube and mounted on removable stacking posts.


• Standard end or side frames is a steel framework of horizontal and vertical angles welded between pairs of posts.


• Standard post is 1 1/2″ square tube on 2000 lbs. capacity units and 2.17″ square tube on 4000 lbs. units.


• Standard plug is base mounted.

Convenience Features

• Designed for forklift handling with Two-Way, Four-Way, or Full Four-Way accessibility


• Wide range of bases, sides, and ends allow virtually unlimited configurations.


• Portability promotes flexible plant layout—change size, shape, and location of storage areas as space or workloads dictate.


• Return more empties in less space.


• Coil racks, fixed posts, inter-stacking with existing units, and nestable racks.

Options

• Floor skid runners for unit conveyability.


• Fork stirrups or pockets to prevent shifting of racks on fork tines.

Need a custom design? Send us your RFQ!

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Portable Stacking Racks

Bulk Containers

 

Bulk Containers Description:

 

IML Visualtainers™

No more looking up at racks and trying to guess what’s inside. IML Visualtainers™ let you see your inventory so that you can keep adequate parts close to the production line—a practice crucial to today’s JIT production processes. These versatile units can be stacked six high at a rated capacity of either 2,000 or 4,000 lbs. Available in both standard and custom designs.

Solid-Sided Dunnage Containers

Store your smaller items or granular materials in IML Solid-Sided Dunnage Containers. Available with corrugated or flat sides in 7- through 16-gauge steel. Standard sizes are offered in height increments of two inches. Floor clearance ranges from 4 to 12 inches. Top flanges can be turned in or out depending on your application. Send your custom specifications and we’ll return standard quotes within one business day. More complex or higher-quantity quotes might take 2 to 3 business days.

 

 

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

 

Bulk Containers

Mobile Work Platforms

 

Mobile Work Platforms Description:

IML Mobile Work Platforms provide a secure workspace at a variety of heights. Each can be easily rolled from job to job on its dual 4″ rear casters. Up to 800 lbs. capacity. Meets or exceeds OSHA standards.

• Rubber-tip legs grip securely to floor when platform is in use.


• 1″ square-tube technology is more abuse-resistant than conventional round tube design.


• Steps are 7″ deep. Choose 35″ or 49″ platform depth.


• Choose perforated EZY Tread ® or technologically advanced Grip Strut® tread for slip resistant footing.

 

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Mobile Work Platforms

Office Ladders

 

Office Ladders Description:

Available in a variety of colors to complement your office décor, IML Office Ladders are easily maneuverable in crowded office environments—and then lock in place.

• Spring loaded 3″ casters compress to engage rubber-tipped legs, which provide traction and secure the ladder firmly in place when in use.


• Steps are 7″ deep and feature solid treads coated with anti-slip vynil tread for slip resistant footing.


• 1″ square-tube technology stands up to abuse better than conventional round tube design.


• Top step is 14″ for added stability.


• Up to 450 lbs. capacity. Meets or exceeds OSHA standards.

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Office Ladders

Industrial Rolling Ladders

 

Industrial Rolling Ladders Description:

Suitable for stockroom, shop floor, and maintenance applications, ROLL-EZY Ladders travel with ease to wherever workers need them—and then lock securely in place. Up to 450 lbs. capacity. Meets or exceeds OSHA standards.

• Models with one-to-seven steps feature spring-loaded 3″ casters that compress to engage rubber-tipped legs, which provide traction and secure the ladder firmly in place when in use.


• Models with eight or more steps feature 4″ casters and our exclusive Ezy-Lock® system, which plants ladder legs firmly to the floor when pressure is applied to the bottom step. (Also standard on 6020H, 7020H, and on 6- or 7-step models with deep step option)


• KD models incorporate a steel sleeve & pin joint secured by a setscrew with nyloc patch.


• Steps are 7″ deep and available in 16″, 24″, or 30″ widths. Top step is 9 1/2″ deep.


• Available with perforated EZY Tread ®, technologically advanced Grip Strut® tread, or standard rubber surface tread.

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

 

Industrial Rolling Ladders

Aluminum Rolling Ladders

 

Aluminum Rolling Ladders Description:

Advanced engineering offers workers performance that’s comparable to steel but, with the added convenience and maneuverability of lightweight aluminum. IML Aluminum Rolling Ladders travel with ease to wherever workers need them—and then lock securely in place. Up to 300 lbs. capacity. Meets or exceeds OSHA standards.

• Constructed of 1″ diameter rigid all-aluminum alloy tubing.


• Spring-loaded 3″ casters compress to engage rubber-tipped legs, which provide traction and secure the ladder in place when in use.


• Steps are 7″ deep and feature extruded solid ribbed aluminum tread for slip-resistant footing.


• Top step is 14″ for added stability.

 

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Aluminum Rolling Ladders

EZY Climb

 

EZY Climb Description:

Ergonomically designed with a gentler 50-degree incline and deeper run, our EZY Climb Ladders feature the feel and comfort of a stairway, enabling workers to carry stock items more quickly and easily while ascending or descending. Up to 450 lbs. capacity. Meets or exceeds OSHA standards

• Models with two, three, or four steps feature spring-loaded 3″ casters that compress to engage rubber-tipped legs, which provide traction and secure the ladder firmly in place when in use.


• 1″ square-tube technology is more abuse-resistant than conventional round tube design.


• Models with five or more steps feature 4″ casters and our exclusive Ezy-Lock® system, which plants ladder legs firmly to the floor when pressure is applied to the bottom step.


• Steps are 7″ deep and available in 16″, 24″, or 30″ widths. Top step is 14″ deep.


• Choose perforated EZY Tread ® or technologically advanced Grip Strut® tread for slip resistant footing.

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

EZY Climb

Industrial Truck Ladder

 

Industrial Truck Ladder Description:

Finally, a ladder that provides access to semi- trailers when docking bays are full or unavailable. Ideal for retail and stand alone facilities. This ladder offers the “trailer jumpers” an alternative. This Industrial Truck Ladder has a 55 degree angle and provides a deeper run which will allow workers the ability to ascend and descend more quickly. Rugged, 10-inch semi-pneumatic wheels enable easy transport over rough surfaces-just left the front bumpers and go.

Industrial Truck Ladder Features:

450 lbs. (1 person) capacity Rigid 1″ diameter all welded steel tubular frame. 10″ rear wheels roll easily over the toughest surfaces (e.g., bar grating) 2-1/2″ heavy duty rubber bumpers/pads on front legs holds ladder secure during use. Steps are 36″ W x 7″ D. Top step is 36″ W x 19″ D. Top step height of 47-1/2″ allows access to standard semi-trailers. Grip Strut tread provides sure footing and self cleaning on steps. Safety chain at both the top and bottom of ladder for added safety. Plus: Ladder can be moved in no time with a simple lift and go. All-welded construction for the toughest industrial use. Meets OSHA standards. Gray enamel finish standard.

 

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Industrial Truck Ladder

Stockpicking Ladders

 

Stockpicking Ladders Description:

These versatile combination ladders can also be used as carrying carts and stockpickers, allowing workers to pull multiple items from inventories simultaneously, thus improving response times. They travel with ease to where workers need them—and then lock securely in place. Meets or exceeds OSHA standards.

• Exclusive Ezy-Lock® system plants ladder legs firmly to the floor when pressure is applied to the bottom step.


• 1″ square-tube technology is more abuse-resistant than conventional round tube design.


• Steps are 7″ deep.


• Top step is 21″ deep for added versatility.


• Three levels of 23″ x 25″ shelves provide 24 sq. ft. of storage


• Technologically advanced Grip Strut® tread for slip-resistant footing.

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Stockpicking Ladders

Multi-Directional Ladder

 

Multi-Directional Ladder Description:

IML multi-directional rolling ladders have four swivel casters which allows precision steering – enabling easier positioning of ladder in tight areas. Double Ezy-Lock mechanism easily lifts ladder to the rolling position. Stepping on the bottom step secures ladder to floor with large 2-1/2″ diameter pads on each leg. 50 degree incline safety angle on stair makes ascending/descending more comfortable and with less effort. Tough 1″ square tube construction with ergonomic round tube handrails. Weight capacity is 450lbs. Meets OSHA standards

 

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Multi-Directional Ladder

Folding Ladders

 

Folding Ladders Description:

Designed to perform in the toughest industrial situations, yet these ladders fold into a compact package for easy storage and convenient transport—all with just four screws! Up to 450 lbs. capacity. Meets or exceeds OSHA standards.

• 1″ square-tube technology is more abuse-resistant than conventional round tube design.


• Large 10″ wheels roll over tough surfaces and allow passage beneath overhead obstacles by tilting the assembled ladder forward.


• Rubber-tip legs grip securely to floor when ladder is in use.


• Steps are 16″ wide and 7″ deep. Top step is 14″ deep for added versatility.


• Choose perforated EZY Tread ® or technologically advanced Grip Strut® tread for slip resistant footing.

 

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Folding Ladders

360 Degree Rotating Ladder

 

360 Degree Rotating Ladder Description:

IML 360 degree rotating rolling ladders are the perfect solution for tight warehouse aisles. These ladders can spind on their own axis while still being able to track in a straight line. Unique 4 wheel, double Ezy-lock design. 2-1/2″ pads on each ladder leg for secure feel in the climbing position. Rugged 1″ square tube construction with comfortable 1″ round tube hand rails.

Available in 60 degree incline angle for a more compact foot print or ezy-angle 50 degree incline. Meets OSHA standards. Weight capacity is 450 lbs.

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

360 Degree Rotating Ladder

Mechanics / Maintenance Ladders

 

Mechanics / Maintenance Ladders Description:

Mechanics / Maintenance Ladders from IML Products are perfect for workers who are on the go and ideal for a variety of applications around the production or shop floor.

All rolling ladders from IML Products travel with ease to wherever workers need them—and then lock securely in place. Up to 450 lbs. capacity. Meets or exceeds OSHA standards.

This ladder features:

• A 21″-deep top platform allows full access to work areas and is equipped with a detachable safety chain at the rear.


• Handles at ladder front provide convenience and aid mobility.


• 4″ casters and our lift & roll wheelbarrow design.


• 1″ square-tube technology is more abuse-resistant than conventional round tube design.


• Steps that are 24″ wide and 7″ deep.


• 2 stair tread options: Choose between perforated EZY Tread ® or technologically advanced Grip Strut® tread for slip resistant footing.

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Mechanics / Maintenance Ladders

Industrial Rolling Ladders – Square Tube ∠60º

 

Industrial Rolling Ladders – Square Tube ∠60º  Description:

Intelligently designed for stockroom, shop floor, and maintenance applications, IML Industrial Rolling Ladders travel with ease to wherever workers need them—and then lock securely in place. Up to 450 lbs. capacity. Meets or exceeds OSHA standards.

• 1″ square-tube technology is more abuse-resistant than conventional round tube design.


• Welded sub assemblies provide superior strength.


• Models with two, three, or four steps feature spring-loaded 3″ casters that compress to engage rubber-tipped legs, which provide traction and secure the ladder firmly in place when in use.


• Models with five or more steps feature 4″ casters and our exclusive Ezy-Lock® system, which plants ladder legs firmly to the floor when pressure is applied to the bottom step.


• Steps are 7″ deep and available in 16″, 24″, or 30″ widths. Top step is 14″ deep.


• Choose perforated EZY Tread ® or technologically advanced Grip Strut® tread for slip resistant footing.

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Industrial Rolling Ladders - Square Tube ∠60º

Steel Step Stools

 

Steel Step Stools Description:

These exceptionally durable step stools feature all-welded construction and cross-braced legs for extraordinary strength and durability in demanding industrial environments. Up to 350 lbs. capacity. Meets or exceeds OSHA standards.

• 1″ square-tube technology is more abuse-resistant than conventional round tube design.


• Rubber-tipped legs ensure stability.


• Platform is 16″ W x 14″ D.


• Choose perforated EZY Tread ® or Anti-Slip Vynil Tread for slip resistant footing.

 

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Steel Step Stools

Two-Step Access Platform

Two-Step Access Platform Description:

Create sturdy dependable access to machinery, elevated work areas, and other hard to access items. Up to 500 lbs. capacity. Meets or exceeds OSHA standards.

• Easily movable.


• Top platform is 18″ high and available in 3 widths.


• Choose 24″, 36″, or 60″ wide steps with a depth of 24″.


• 1″ square-tube technology is more abuse-resistant than conventional round tube design.


• Technologically advanced Grip Strut® tread for slip resistant footing.

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Two-Step Access Platform

Custom Work Platform

 

Customer Work Platform Description:

 

IML Custom Work Platforms allow you to choose the style, height, and configuration that perfectly meet your commercial or industrial applications. Our work platforms have up to 500 lbs. capacity. All custom work platforms, regardless of dimensions and purpose, meet or exceed OSHA standards.

• Virtually limitless and flexible design configuration possibilities enable you to build large multi-height work platforms that surround machinery or span entire factory or warehouse floor spaces.


• Attach same-height lift extension units to select platforms to add 3 feet of width, or units of different height to create step-down areas for easier access to work sites.


• High quality extension units allow you to add up to 3 feet width to any platform.


• Rigid 1 1/4″ round tubing provides superb construction strength and durability.


• Steps are 36″ wide and 9 1/2″ deep with deeper platform at top for added stability.


• Features technologically advanced Grip Strut® tread for slip resistant footing and easy maintenance.


• Contact our customer service for more information about our product and equipment offerings, or Request a Quote to order a custom work platform now.

We also carry many other items and parts related to work platforms, including rolling ladders,mobile work platforms, and assembly floor work platforms, all of which are designed to boost efficiency, systemically improve work flow, and boost your bottom line.

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Custom Work Platform

Cylinder Cabinets

 

Cylinder Cabinets Description:

These cabinets allow quick visual inventory control of fuel and gas cylinders while also providing organized storage that’s secure from tampering or unauthorized access. They ship knocked down and assemble easily with the included EZY-ERECT hardware. Or opt for pre-assembled, or fully welded, or even custom configured units. Just send us your RFQ. Meet or exceed OSHA standards.

• 13-gauge expanded metal construction with 1 1/2″ diamonds is tough yet relatively lightweight.


• HCC models provide horizontal storage for 4 to 16 tanks weighing up to 46 lbs. each.


• VCC models provide vertical storage with labeled compartments for FULL and/or EMPTY cylinders.


• Painted Safety Yellow with NO SMOKING warnings, per regulations.

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Cylinder Cabinets

Cylinder Cabinets

 

Cylinder Cabinets Description:

These cabinets allow quick visual inventory control of fuel and gas cylinders while also providing organized storage that’s secure from tampering or unauthorized access. They ship knocked down and assemble easily with the included EZY-ERECT hardware. Or opt for pre-assembled, or fully welded, or even custom configured units. Just send us your RFQ. Meet or exceed OSHA standards.

• 13-gauge expanded metal construction with 1 1/2″ diamonds is tough yet relatively lightweight.


• HCC models provide horizontal storage for 4 to 16 tanks weighing up to 46 lbs. each.


• VCC models provide vertical storage with labeled compartments for FULL and/or EMPTY cylinders.


• Painted Safety Yellow with NO SMOKING warnings, per regulations.

 

Cylinder Cabinets 2

 

 

 

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

 

Cylinder Cabinets

AW119 Helicopter Maintenance Platform

AW119 Helicopter Maintenance Platform

AW119 Helicopter Maintenance Platform Features:

• Choice of Welded or Bolted Stand*


• Available in Steel or Aluminum


• Allows the technician a safe working platform


• Designed for easy maneuverability and storage


• Custom Designed For Your Aircraft


• Slip Resistant Traction Tread Steps


• Lift System for skids


• Tool tray included


• Exceed ANSI and OSHA standards


• Choice of powder coat color

AW119 Helicopter Maintenance Platform Specifications:

• Overall Dimensions (In Inches) - Length 65″ x Width 36″ x Height 102″


• Top Deck – 50″

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

AW119 Helicopter Maintenance Platform

New Helicopter Canopy Offering Protection from Harsh Elements Launched!

Industrial Manlifts, an aerial work platform specialist helping aviation clients determine how best to consolidate resources and save time, has today announced the availability of a new Helicopter Maintenance Canopy (C.A.M.), designed to help prevent overexposure to the elements, particularly when maintenance and other maintenance-related functions are being carried out.

According to Industrial Manlifts’ President and spokesperson, Peter Vasquez, the new canopy replaces the use of other more heavy and bulky covers.

“However, there’s no denying that heavier and bulkier covers can damage to aircraft equipment that can result in lost flight hours, lost revenue, expensive replacement parts and labor. The new C.A.M. prevents all that, and offers a whole lot more protection,” he said.

“Not only does this new Helicopter Maintenance Canopy allows mechanic to perform maintenance in all weather conditions, but it provides them and the aircraft from the effects of harsh weather,” added Vazquez.

The new C.A.M not only installs and removes quickly, but it does not interfere with the inspection of an aircraft. Even the tying down of the aircraft’s blades integrated very smoothly with the C.A.M.

As the newest product to have been added to their growing line of aviation products, the new Helicopter Maintenance Canopy / Canopy for Aircraft Maintenance (C.A.M.) Features:

• 1 Quadrant (Canopy)


• 1 Receiver sleeve with tie downs built-in


• 1 Storage bag.

Full enclosure C.A.M. system kit for three bladed systems includes:

• 3 Quadrants (Canopies)


• 1 Receiver sleeve with tie downs built-in


• 1 Storage bag.

Full enclosure C.A.M. system kit for four bladed systems includes:

• 4 Quadrants (panels),


• 1 Receiver sleeve


• 1 Storage bag.

ABOUT INDUSTRIAL MANLIFTS:

As an aerial access solution provider, Industrial Man Lifts specializes in providing its aviation industry clients with information on what best meets the needs of your projects and business cycle. We know that every company is different, and every project is unique. Our aerial work platform specialists are trained to understand you first and pinpoint the areas where we can best accommodate your projects, reduce cost and improve profits. By determining these things first, the actual selection of products is much easier, and the purchase order more precise and efficient – just like your process flow will be.

New Helicopter Canopy Offering Protection from Harsh Elements Launched!

Super Helicopter Dolly Handler

Super Helicopter Dolly Handler

Super Helicopter Dolly Handler Features:

Super Helicopter Dolly Handler weight capacity 15,000 Lbs. Overall dimension when assembled is 15 1/2 feet wide by 18 feet long (20 feet for Bell 214) by 25 inches high. This Super Helicopter Dolly Handler has four DUAL wheel swivel casters across the front and eight rigid casters across the rear. Constructed of heavy duty steel with the best available hardwood for decking. This ensures long dolly life and good skid-gripping ability.

Super Helicopter Dolly Handler Specifications:

Capacity:	15,000 Lbs
Wheels:	4 dual caster / 8 rigid 16 total
Decking:	Best available hardwood
Shipping Weight:*	4,400 Lbs
Dimensions Assembled:	16′ W 18′ L 25″ H

WARRANTY
Length :	One year from date of purchase
Details:	Against manufacturer defects

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Super Helicopter Dolly Handler

Heavy Duty XL Helicopter Dolly Handler

Heavy Duty XL Helicopter Dolly Handler

Heavy Duty XL Helicopter Dolly Handler Features:

Heavy Duty XL Helicopter Dolly Handler was designed for the Bell 429, 230, and 430 models and also for those desiring a larger landing and maintenance area. Handler weight capacity 9,500 Lbs. Overall dimension when assembled is 14 feet wide by 16 feet long by 18 inches high. This Heavy Duty XL Helicopter Dolly Handler has four DUAL wheel swivel casters across the front and twelve rigid casters across the rear. Constructed of heavy duty steel with the best available hardwood for decking. This ensures long dolly life and good skid-gripping ability.

Heavy Duty XL Helicopter Dolly Handler Specifications:

Capacity:	9,500 Lbs
Wheels:	4 dual caster / 8 rigid 16 total
Decking:	Best available hardwood
Shipping Weight:	3,300 Lbs
Dimensions Assembled:	14′ W 16′ L 18″ H

WARRANTY
Length :	One year from date of purchase
Details:	Against manufacturer defects

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Heavy Duty XL Helicopter Dolly Handler

Heavy Duty Helicopter Dolly Handler

Heavy Duty Helicopter Dolly Handler:

Heavy Duty Helicopter Dolly Handler Features:

Heavy Duty Helicopter Dolly Handler weight capacity 9,500 Lbs. Overall dimension when assembled is 12 feet wide by 14 feet long by 18 inches high. This handler has four DUAL wheel swivel casters across the front and eight rigid casters across the rear. Constructed of heavy duty steel with the best available hardwood for decking. This ensures long handler life and good skid-gripping ability.

Heavy Duty Helicopter Dolly Handler Specifications:

Capacity:	9,500 Lbs
Wheels:	4 dual caster / 8 rigid 16 total
Decking:	Best available hardwood
Shipping Weight:	2,000 Lbs
Dimensions Assembled:	12′ W 14′ L 18″ H

WARRANTY
Length :	One year from date of purchase
Details:	Against manufacturer defects

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Heavy Duty Helicopter Dolly Handler

Standard Helicopter Dolly Handler

Standard Helicopter Dolly Handler

Standard Helicopter Dolly Handler Features:

Standard Helicopter Dolly Handler, weight capacity 3,800 Lbs. Overall dimension when assembled is 12 feet wide by 14 feet long by 18 inches high. This Standard Helicopter Dolly Handler has four single wheel swivel casters across the front and six rigid casters across the rear. Constructed of heavy duty steel with the best available hardwood for decking. This ensures long dolly life and good skid-gripping ability.

Standard Helicopter Dolly Handler Specifications:

Capacity:	3,800 Lbs
Wheels:	4 caster / 6 rigid 10 total
Decking:	Best available hardwood
Shipping Weight:	1,800 Lbs
Dimensions Assembled:	12′ W 14′ L 18″ H

WARRANTY
Length :	One year from date of purchase
Details:	Against manufacturer defects

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377.

Standard Helicopter Dolly Handler

Helicopter Maintenance Canopy

Helicopter Maintenance Canopy / Canopy for Aircraft Maintenance (C.A.M.)

Helicopter Maintenance Canopy / Canopy for Aircraft Maintenance (C.A.M.) Features:

• 1 Quadrant (Canopy)


• 1 Receiver sleeve with tie downs built-in


• 1 Storage bag.

Full enclosure C.A.M. system kit for 3 bladed systems includes:

• 3 Quadrants (Canopies)


• 1 Receiver sleeve with tie downs built-in


• 1 Storage bag.

Full enclosure C.A.M. system kit for 4 bladed systems includes:

• 4 Quadrants (panels),


• 1 Receiver sleeve


• 1 Storage bag.

Helicopter Maintenance Canopy

Additional Receiver sleeve and Storage bag kit is also available.

Available Civilian Air frames:

• AW-109


• AW-119


• AS-350


• AS-355


• EC-130

Available Military Air frames include:

• Apache AH-54 Attack Helicopter

Seeking a C.A.M. for a helicopter not listed here? Not to worry, we customize! We offer many different colors and patterns.

Helicopter Maintenance Canopy

A46JRT Articulated Boom Lift

A46JRT Articulated Boom Lift

A46JRT Articulated Boom Lift Features:

• Multi-function, variable speed platform controls


• Proportional controls


• Tilt alarm


• Zero tailswing


• Hour meter


• Flashing amber light


• Horn


• Power line to platform


• Drive motion alarm


• ANSI compliant

OPTIONS

• Special paint colors


• AC generator 110/2kw


• Airline to platform


• Cold weather package


• Light package


• Extreme environment package


• Environmental green oil


• Aircraft package


• Deluxe aircraft package


• Extreme cold weather package


• Protection package


• CSA compliant

A46JRT Articulated Boom Lift Specifications:

DIMENSIONS	A46JRT
Max. working height	52 ft 11 in
Max. platform height	46 ft 11 in
Max. horizontal reach	24 ft 11 in
Platform size	39 in x 72 in
Overall width (A)	6 ft 10 in
Overall length (B)	18 ft 4 in
Stowed height (C)	7 ft 2 in
Ground clearance	13 in
PERFORMANCE
Platform capacity (SWL)	500 lbs
Max. drive height	46 ft 11 in
Max. drive speed (stowed)	4.5 mph
Max. drive speed (elevated)	0.8 mph
Jib length	5 ft
140 °	140°
Platform rotation	160°
Turret rotation	360° non-continuous
Superstructure rotation	360° non-continuous
Gradeability	22% / 40%
Inside turning radius	32 in
Outside turning radius	10 ft 5 in
Tires	high grip 355/55D625NHS
Controls	proportional
Drive system	4 wheel drive
POWER
Power source	Kubota V1505T Diesel
WEIGHT
Gross weight	14,600 lbs

Industrial Manlifts is YOUR total aerial access solution provider. We can customize any aerial access solution for any project. Operators standing by, (888) 730-8377.

A46JRT Articulated Boom Lift

A38E Electric Articulating Boom Lift

A38E Electric Articulating Boom Lift

A38E Electric Articulating Boom Lift Features:

• Proportional one-hand controls


• Minimal front boom overhang


• Ultra-tight inside turning radius


• Tilt alarm and cut out


• Horn


• Flashing amber light


• 2 person + equipment capacity indoors


• 1 person + equipment capacity outdoors


• Power line to platform


• 70° manual platform rotation


• Direct DC drive parallel wired wheel motors


• Non-marking tires


• ANSI compliant

A38E Electric Articulating Boom Lift OPTIONS:

• Special paint colors


• Environmental green oil


• CSA compliant

A38E Electric Articulating Boom Lift Specifications: 

DIMENSIONS	A38E
Max. working height	43 ft 7 in
Max. platform height (A)	37 ft 7 in
Max. horizontal reach	18 ft 4 in
Clearance height at max. outreach	17 ft 9 in
Platform size (inside)	1ft 9in x 4ft 3.2in
Platform size (outside)	3ft 3in x 4ft 3.9in
Overall width (B)	4 ft 11 in
Overall length (C)	13 ft 3 in
Stowed height (D)	6 ft 5 in
Ground clearance	4.7 in
PERFORMANCE
Platform capacity (SWL)	475 lbs
Max. drive speed (stowed)	2.5 mph
Max. drive speed (elevated)	0.4 mph
Gradeability	36%
Inside turning radius	15 in
Outside turning radius	7 ft 10 in
Controls	smooth, one-hand proportional controls
Drive system	direct drive DC
POWER
Power source	8 x 6V, 220Ah batteries
WEIGHT
Gross weight	8,311 lbs

Industrial Manlifts is YOUR total aerial access solution provider. We can customize any aerial access solution for any project. Operators standing by, (888) 730-8377.

A38E Electric Articulating Boom Lift

SL26SL/SL30SL Speed Level Lift

SL26SL/SL30SL Speed Level Lift

SL26SL/SL30SL Speed Level Lift Features:

• Speed level – automatic powered platform levelling


• Descent alarm


• Hour meter


• Horn


• Power line to platform


• Oscillating front axle


• Pneumatic tires


• Dual multi-disc brakes


• One-hand, proportional controls


• Fold-down guardrails


• ANSI compliant

SL26SL/SL30SL Speed Level Lift OPTIONS:

• Special paint colors


• Flashing amber light


• All motion alarm


• Diesel exhaust scrubber


• Environmental green oil


• CSA compliant

SL26SL/SL30SL Speed Level Lift Specifications:

DIMENSIONS	SL26SL	SL30SL
Max. working height	32 ft	36 ft
Max. platform height (A)	26 ft	30 ft
Platform size (stowed)	5 ft 8 in x 12 ft	5 ft 8 in x 13 ft 11 in
Platform size (extended)	5 ft 8 in x 15 ft	n/a
Overall width (D)	7 ft	7 ft
Overall length (C)	12 ft 5 in	14 ft 5 in
Stowed height (B)	8 ft 6 in	8 ft 6 in
Min. height (guardrails folded)	59 in	59 in
Chassis ground clearance	12 in	12 in
Axle ground clearance	8 in	8 in
PERFORMANCE
Platform capacity (SWL)	1,500 lbs	1,300 lbs
Max. drive height	26 ft	30 ft
Max. drive speed (stowed)	3.2 mph	3.2 mph
Max. drive speed (elevated)	0.5 mph	0.5 mph
Raise/lower time	21/32 seconds	24/36 seconds
Gradeability	27 ° / 50 %	27 ° / 50 %
Max. levelling, front to rear	9°	9°
Max. levelling, side to side	13°	13°
Inside turning radius	12 ft 10 in	12 ft 10 in
Tires	26 x 12.00 – 12 NHS Pneumatic
Controls	Proportional joystick
Drive system	4 wheel drive with hydraulic motors and flow dividers
POWER
Power source	Water cooled diesel engine
WEIGHT
Gross weight	7,053 lbs	7,495 lbs

Industrial Manlifts is YOUR total aerial access solution provider. We can customize any aerial access solution for any project. Operators standing by, (888) 730-8377.

SL26SL/SL30SL Speed Level Lift

S2770/3370RT Rough Terrain Scissor Lift

S2770/3370RT Rough Terrain Scissor Lift

S2770/3370RT Rough Terrain Scissor Lift Features:

• Slide-out deck extension


• 4 wheel drive


• 4 hydraulic stabilizers with automatic levelling


• Horn


• Proportional joystick control


• Foam filled lug tires


• Power line to platform


• Driveable at full height


• Articulating axle


• Drive motion alarm


• Lower warning alarm


• Fold-down guardrails


• ANSI compliant

OPTIONS

• Special paint colors


• Flashing amber lights


• Non marking tires


• D-ring safety harness lanyard attachments (x2)


• LPG power


• Hydraulic generator


• CSA compliant

Specifications:

DIMENSIONS	S2770RT	S3370RT
Max. working height	33 ft	39 ft
Max. platform height (A)	27 ft	33 ft
Platform size (stowed) (B)	8 ft 11 in x 5 ft 5 in	8 ft 11 in x 5 ft 5 in
Platform size (extended) (C)	13 ft 1 in x 5 ft 5 in	13 ft 1 in x 5 ft 5 in
Deck extension	4 ft	4 ft
Overall width (D)	5 ft 10 in	5 ft 10 in
Overall length (E)	11 ft	11 ft
Stowed height (F)	8 ft 6 in	9 ft
Min. height (guardrails folded)	6 ft	6 ft 6 in
Ground clearance	13 in	13 in
PERFORMANCE
Platform capacity (SWL)	1,250 lbs.	1,000 lbs
Max. drive height	27 ft	33 ft
Max. drive speed (stowed)	2.8 mph	2.8 mph
Max. drive speed (elevated)	0.2 mph	0.2 mph
Raise/lower time	26/30 sec	50/60 sec
Gradeability	35%	35%
Max. stabilizer levelling, front to rear	6°	6°
Max. stabilizer levelling, side to side	10°	10°
Inside turning radius	9 ft 3 in	9 ft 3 in
Outside turning radius	15 ft 1in	15 ft 1in
Tires	27 x 10.5 – 15 foam filled loader lug
Controls	proportional joystick
Drive system	4 wheel drive	4 wheel drive
POWER
Power source	Kubota D-902 water cooled diesel 22.5h
WEIGHT
Gross weight	6,172 lbs	7,980 lbs

Industrial Manlifts is YOUR total aerial access solution provider. We can customize any aerial access solution for any project. Operators standing by, (888) 730-8377.

S2770/3370RT Rough Terrain Scissor Lift

M1230E Electric Scissor Lift

M1230E Electric Scissor Lift

M1230E Electric Scissor Lift Features:

• Proportional controls


• Descent and tilt alarms


• High amp hour rating gives long usage between charges


• Emergency lowering at chassis controls


• Non-marking, solid rubber tyres


• Power line to platform


• Forklift pockets


• Saloon door-style platform entry


• Horn


• Tie down points


• 2 persons + equipment capacity indoors


• 1 person + equipment capacity outdoors


• Selectable motion


• ANSI Compliant

OPTIONS

• Special paint colors


• 20in roll-out extension deck


• Environmental green oil


• CSA compliant

M1230E Electric Scissor Lift Specifications:

DIMENSIONS:	M1230E
Max. working height:	17 ft 11 in
Max. platform height (A):	11 ft 11 in
Platform size (inside):	29 in x 38 in
Overall width (B):	30 in
Overall length (D):	53 in
Stowed height (C):	64 in
Ground clearance:	3 in
PERFORMANCE:
Platform capacity (SWL):	500 lbs
Max. drive height:	11ft 11in
Max. drive speed (stowed):	2 mph
Max. drive speed (elevated):	0.4 mph
Raise/lower time:	18/25 sec
Gradeability:	25%
Max. operating slope: (side to side)	1.5°
Max. operating slope: (front to back)	2°
Inside turning radius:	14.4 in
Outside turning radius:	58.5 in
Tires:	12 in dia. solid rubber, non-marking
Parking brake:	2 wheel, spring-applied, hydraulically-released with manual overdrive
Drive system:	dual front hydraulic motors
Controls:	proportional
POWER:
Power source:	24V 4hp DC electric motor 4-220 Ah batteries
Battery charger:	90V – 240V – 18 amp automatic
WEIGHT:
Gross weight:	1,720 lbs

Industrial Manlifts is YOUR total aerial access solution provider. We can customize any aerial access solution for any project. Operators standing by, (888) 730-8377.

M1230E Electric Scissor Lift

Resources

Resources

Disabled Passenger Lift

Disabled Passenger Lift

Disabled Passenger Lift Features:

The Disabled Passenger Lift provides an efficient and safe means of boarding or de-boarding passengers who require special assistance. This unit can interface wide body aircraft such as Boeing 747, 757, 767, & 777 as well as narrow body aircraft including regional jets. The Disabled Passenger Lift can accommodate up to three (3) full size wheel chairs and one (1) attendant at one time.

• 
  Efficiency – Unit requires only one operator to interface the aircraft and assist the disabled passenger. The platform operator can lower the rear access platform to allow a ground handler to load additional passengers. This will allow simultaneous boarding and de-boarding of multiple passengers when the disabled passenger lift is positioned at the aircraft doorsill without the need to fully lower the unit multiple times.


• 
  Rear Access Platform – Full width rear access platform with 600 lbs. capacity provides room for an attendant and passengers in full size wheel chairs, powered wheel chairs, or powered scooters.


• 
  Front Extenda-deck – Full width powered deck with aircraft bumper extends 4 ft (1.22 m) to access aircraft with a self adjusting swivel bumper for easy positioning.


• 
  Platform Control Station—The platform control station is on an adjustable positioning track that allows the operator to choose where they want to operate the unit.


• 
  Travel Speed – 3.0 -3.5 mph


• 
  Power Source: 48 Volt DC electrical system with onboard 110 VAC charger.


• 
  Tires: 22” Solid Rubber.


• 
  Standard Paint: Federal Standard Insignia White with black striping.


• 
  Drive: The unit can be driven at any elevation from the platform. An automatically activated creep speed function allows smooth & safe driving of the platform at full elevation.

SPECIFICATIONS:

• Services Max Door Sill Height—17 ft-9 in.


• Services Min Door Sill Height—3 ft 11 in.


• Wind Speed Rating—90 mph.


• Maximum Total Capacity—1,000 lbs.


• Main Platform – 1,000 lbs.


• Access Platform – 600 lbs.


• Front Extenda-deck – 600 lbs.

AVAILABLE OPTIONS:

• Boarding Chair


• Platform Canopy


• Fold Down Chair for Attendant


• Head / Tail Lights


• Cold Weather Package with Hydraulic System and Battery Heaters


• Gasoline Power


• Custom Paint Colors

SAFETY FEATURES:

• 
  Standard Equipment: Blinking amber light, Hour meter, Lighting at entry/exit, Adjustable utility lighting, Tie downs for boarding chair, Fire extinguisher, Low battery Indicator, Nylon cage netting at both ends of main platform, Manual lowering controls.


• 
  Extenda-deck Guardrails: The adjustable guardrails lock in 2” (0.05 m) increments to fully contour the fuselage and door when fully extended.


• 
  Brakes: Spring applied, pressure release.


• 
  Holding Valve: Safety device to maintain elevation in case of damage or failure.


• 
  Stability: The unit provides maximum stability to ensure operators and passengers total comfort at all times. The unit has minimal side-to-side movement in high wind conditions and can meet the ANSI A92.7I requirement for a 90 mph jet blast.

Industrial Manlifts is YOUR total aerial access solution provider. We can customize any aerial access solution for any project. Operators standing by, (888) 730-8377.

Disabled Passenger Lift

Telescopic Scissor Lift Maintenance Platform

Telescopic Scissor Lift Maintenance Platform

Telescopic Scissor Lift Maintenance Platform is a unique telescopic scissor design. This self-propelled scissor lift offers high capacity, a large working platform and unmatched stability at full elevation. The unit can drive at full elevation.

Platform Data (Average):

• Travel Speed (Variable & Controllable)


• High Speed – 2.4 mph (3.9 km/hr)


• Elevated – 0.68 mph (1.13km/hr)


• Gradeability – 10%


• Telescoping Scissor Design Provides Maximum Stability at Full Elevation


• Maximum Platform Height – 32’ (9.75m)


• Minimum Platform Height – 4’5” (1.34m)


• Platform Lift Speed – 0.42 ft/sec (0.13 m/sec)


• Platform Lower Speed – 0.63 ft/sec (0.19 m/sec)


• Main Platform Capacity 3,000 lbs (1,360.8 kg)


• Extenda-deck Capacity 1,000 lbs (453.6 kg)

Telescopic Scissor Lift Maintenance Platform Specifications:

Maximum platform height:	32′ 9.75m
Minimum platform height:	53″ 134 cm
Capacity:	3,000 lbs. 1360 kg.
Unit weight:	17,800 lbs. 8073 kg.
Overall shut height:	7’11″ 2.41m
Platform size:	84″ x 180″ 213 cm x 457 cm
Overall length:	17’2″ 5.23m
Overall width:	7’5″ 2.26m

Options:

• 6’, 8, or 10’ (1.83, 2.44, or 3.05m) Power Deck


• Extension (Extenda-Deck)


• All Motion Alarm


• Flashing or Rotating Light


• 36VDC Power


• Gasoline Engine


• Diesel Engine


• Split “V” Deck Design


• Padded Rails


• Adjustable Work Lights


• Extreme Cold Weather Package


• Contact LIFT-A-LOFT for Custom Designs


• Pressure sensitive trip Bumpers

Safety:

• Brakes Spring Applied, Pressure Released


• Deadman Controls


• Anti-slip Work Surface


• Holding Valves on Lift Cylinders


• Emergency Stop Switch (all control stations)


• Lanyard Attachments


• Aircraft Bumpers


• Ceestrered Stabilizers

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377

Telescopic Scissor Lift Maintenance Platform

Propane Cages

Propane Cages

Propane Cages Features:

Designed to provide you with safe, secure storage for your propane cylinders, our propane cages are forklift gas stations designed to hold propane cylinders in a lockable storage rack. A slidinglocator pin secures both 33 and 44 pound propane cylinders while keeping the pressure release valve pointed upwards in case of an accidental over pressurization.

Specifications:

SPC-4 

• Height: 39”


• Width: 33”


• Depth: 36″


• Weight: 135 lbs.


• Cylinder capacity: 4 ea.

SPC-8

• Height: 70”


• Width: 33”


• Depth: 36″


• Weight: 174 lbs.


• Cylinder capacity: 8 ea.

SPC-12

• Height: 70”


• Width: 48”


• Depth: 36″


• Weight: 280 lbs.


• Cylinder capacity: 12 ea.

SPC-16

• Height: 70”


• Width: 60”


• Depth: 36″


• Weight: 285 lbs.


• Cylinder capacity: 16 ea.

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377

Propane Cages

Cylinder Storage Pallet Box

Cylinder Storage Pallet Box

Cylinder Storage Pallet Box Features:

The Cylinder Storage Pallet Box is a fully enclosed hard goods storage and delivery option that is set on top of a pallet for easy transportation. The weather-proof box is fully enclosed, making it perfect for construction sites and branch deliveries. It comes standard with two doors and two inner shelves for organization. The pallet bottom can be customized to fit on your particular style of pallet trailer.

Pallet Box Specifications:

• Height: 63”


• Width: 38”


• Weight: 618 lbs.

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377

Cylinder Storage Pallet Box

Propane Island Cage

Propane Island Cage

Propane Island Cage Features:

Designed for twenty lb. propane cylinders, our Propane Island Cage is fully enclosed storage cages designed to secure up to eighteen cylinders. Built with crimped sheet metal siding and a lockable door, these cages bolt to the ground for added security.

LP-12 Specifications:

• Height: 72”


• Width: 33”


• Depth: 32″


• Weight: 230 lbs.


• Cylinder capacity: 12 ea.

LP-18 Specifications: 

• Height: 72”


• Width: 42”


• Depth: 32″


• Weight: 255 lbs.


• Cylinder capacity: 18 ea.

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377

Propane Island Cage

Compressed Gas Security Cage

Compressed Gas Security Cage

Compressed Gas Security Cage Features:

The Compressed Gas Security Cage is built on the same design as our other cages but on a pallet bottom to provide secure truck delivery from fill plants to branch stores both day and night, making it ideal for delivering nitrous oxide and poison gases.

Security Cage Specifications:

• Height: 74”


• Width: 42”


• Depth: 39


• Weight: 470 lbs.


• Cylinder capacity: 16 ea.


• Strap: 5304-SEF

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377

Compressed Gas Security Cage

STS-20-FW-2 Cylinder Cage

STS-20-FW-2 Cylinder Cage

STS-20-FW-2 Cylinder Cage Features:

STS-20-FW-2 Cylinder Cage is the largest firewall storage option offered by Industrial Manlifts. Made with expanded metal siding, the STS-20-FW-2 Cylinder Cage uses a forklift bottom and four-point lifting ears for easy storage and movement of your cylinders. Marinite I firewall combines with lockable doors and our unique E-Track strapping system to keep your cylinders secure and OSHA compliant.

Cylinder Cage Specifications:

• Height: 79”


• Width: 50”


• Depth: 50″


• Weight: 950 lbs.


• Cylinder capacity: Oxygen: 10ea., Acetylene: 6 ea.


• Strap: 5304-SEF

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377

STS-20-FW-2 Cylinder Cage

STS-20 Cylinder Cage

STS-20 Cylinder Cage

STS-20 Cylinder Cage Features:

Holding twenty high-pressure cylinders, the STS-20 Cylinder Cage is our largest storage option. Made with expanded metal siding, the STS-20 Cylinder Cage uses a forklift bottom and four-point lifting ears to facilitate easy movement of your cylinders. A seven gauge steel top combines with a lockable door and our unique E-Track strapping system to keep your cylinders secure.

Cylinder Cage Specifications:

• Height: 79”


• Width: 50”


• Depth: 50″


• Weight: 692 lbs.


• Cylinder capacity: 20 ea.


• Strap: 5308-SEF

Industrial Man Lifts is your aerial access solution provider. We can customize any product for any size job. Operators always standing by, (888) 730-8377

STS-20 Cylinder Cage